Strong Big Saver (For painting foundation)

2010年10月15日 admin

Strong Big Saver (For painting foundation)Wet rag for factory

Car repair factory・Repair factory・Painting factory・Household

Feature

  • The best suited for anti static effect when painting and cleaning of garbage, dirt
  • Easy and ensure washing by synergism of cotton spun lace which doesn't scratch with soft texture and also excel as industry disposal

Directions for use

  • Open container cover, cut the top of aluminum bag, use with the bag is inside of the container
  • Pick up the tip from center of roll, and make through it to the center hole of the cover
  • Close the cover tight and pick out from upper(with perforation), it will be cut 1 piece by pulling quickly

Strong Big Saver (For machine industries)

2010年10月15日 admin

Strong Big Saver (For machine industries)Wet rag for factory

Various kinds of factory・Household

Feature

  • Good for oil stain, washing ingredients of gently for hand and skin(combined orange oil, aloe extract)
  • Easy and ensure washing by synergism of cotton spun lace which doesn't scratch with soft texture and also excel as industry disposal
  • Stop rusting after washing temporary as contain corrosion inhibitor
  • Grind in case of painting rusted surface
  • Usable as thick material and big size

Directions for use

  • Open container cover, cut the top of aluminum bag, use with the bag is inside of the container
  • Pick up the tip from center of roll, and make through it to the center hole of the cover
  • Close the cover tight and pick out from upper(with perforation), it will be cut 1 piece by pulling quickly

Color dust cut (Dust proof floor paint)

2010年10月15日 admin

Color dust cut (Dust proof floor paint)Color dust cut

Factory・Office・Laboratory・Warehouse

Feature

  • Dust proof floor paint for concrete floor
  • There is no irritant odor of organic solvent and no danger of fire and explosion as drainage system two pack type
  • Coat of paint is high gloss though quick dry type paint, excelling for waterproof, chemical resistant
  • Simple combination as base 4 : hardener 1, easy to paint for amateur person
  • Usable for approximately 130m2

Directions for use

  • Mix base 4 : hardener 1, make coat of paint by its reaction effect

Feather cloth DX

2010年10月15日 admin

Feather cloth DXRug of cotton 100%

Machine factory・Car repair factory

Feature

  • Feather or fabric is not leave as non binder cotton spun lace( water flow confounding non woven fabric)
  • It doesn't scratch as soft texture, and easy to wipe out
  • Excel as industry disposal as cotton 100%

Directions for use

  • Pull out from center of container and use by cutting at perforation
read more: Feather cloth DX

Elephant mark Belt Wax

2010年10月15日 admin

Elephant mark Belt WaxSlip prevention

Factory・Rice mill・Farm house・Agricultural Cooperative

Feature

  • There is effect for prevention of slipping flat belt, making better conduction efficiency
  • Effect continue long time

Directions for use

  • Paint to flat belt

Aqueous Floor Paint

2010年10月15日 admin

Aqueous Floor PaintBusiness use wax

Office・household・factory

Feature

  • Good feeling of painting and excel as dry
  • Coat of painting is strong and hard moderately, excel as water proof, launderability, abrasion resistant, heel mark resistant, scuff resistant, it can be kept coat of painting surface good condition long time
  • Easy to remove dirt
  • There is tendency of difficulty to turn yellow compare with cognate resin wax which on the market
  • It is possible to maintain by dry buffing as wax of contained resin which excel as abrasion resistant

Directions for use

  • Mop up after remove floor dirt enough by washing agent.(in case of coated floor wax already, doing surface washing or wax exfoliation) Coat uniformly by mop etc. After coated surface become dry, do next coating. (2~4 times usually)

Antibacterial Floor Wax

2010年10月15日 admin

Antibacterial Floor WaxBusiness use wax

Office・Household・Hospital

Feature

  • Give the antibacterial effect as soon as coat the wax
  • It is effective for most of bacteria, also usable for MRSA strain as cause of hospital infection
  • Easy to use mop when coating, spreading very well
  • Excel as dry, easy to coat over several layers by short time, and possible to appear high quality gloss. Thereby it is possible to shorten work time.
  • Coat of painting is strong and hard moderately, prevent to scratch, excel as abrasion resistant, it can be kept coat of painting surface good condition long time
  • Prevent heel mark, easy to remove dirt and excel as washability, it is possible to reduce a lots of daily maintenance work and also possible to work for washing and wiping at ease
  • There is tendency of difficulty to turn yellow compare with cognate resin wax which on the market
  • Antibacterial effect continue approximately 1month~1month and half

Directions for use

  • Mop up after remove floor dirt enough by washing agent.(in case of coated floor wax already, doing surface washing or wax exfoliation) Coat uniformly by mop etc. After coated surface become dry, do next coating. (2~4 times usually)

Hand Protector (solvent resistance)

2010年10月15日 admin

Hand Protector (solvent resistance)Protectant

Machine factory・Car repair factory・Printing factory

Feature

  • Protect hands from oil solution according to make thin membrane on surface of skin by rubbing in hand before work

Directions for use

  • Protect loosing oil from hands by gasoline. It is easy to lose when wash the hand with oil stain

Hand Protector (oil resistance)

2010年10月15日 admin

Hand Protector (oil resistance)Protectant

Machine factory・Car repair factory・Printing factory

Feature

  • Protect hands from oil solution according to make thin membrane on surface of skin by rubbing in hand before work

Directions for use

  • Protect loosing oil from hands by gasoline. It is easy to lose when wash the hand with oil stain

One touch Grease

2010年10月15日 admin

One touch GreaseFor all purpose grease in tube

Various kinds of machine factory

Feature

  • It is possible to lubricate without dirt hands, and it continue lubrication・rust resistant effect long time.

Directions for use

  • Take out the cap, fit the nozzle, using with cut the tip
read more: One touch Grease

Gasket remover

2010年10月15日 admin

Gasket removerFor remove packing stuck by high temperature

Machine factory・Car repair company・Printing company

Feature

  • Remove quickly gasket・packing・adhesive・grease・paint・seal etc. which stuck at machine or parts by high temperature, without damage

Directions for use

  • Spray to packing etc, leave it approximately 5~15minutes, remove it by putty knife etc.
  • For thick packing, peel it before spray, coat on the rest of packing with several Scratching
read more: Gasket remover

Bond remover

2010年10月15日 admin

Bond removerRemover seal・sticker

Machine factory・Car repair factory・Printing factory

Feature

  • Easy to remove seal, sticker only coat by paint brush

Directions for use

  • Coat on the seal・sticker by attaching brush, leave it 5 minutes, and peel it
  • After peeled, wash it away by water or wipe it out by rug
read more: Bond remover

Mold releasing spray

2010年10月15日 admin

Mold releasing spraySpray type as silicon is main agent

Plastic processing plant

Feature

  • Use for mold releasing of thermo reversible resin or thermosetting resin and rubber
  • There is stable effect in case of high temperature too

Directions for use

  • Spray to the metal mold before molding resin

SYK Rust resistant penetrating agent

2010年10月15日 admin

SYK Rust resistant penetrating agentGiving lubrication by powerful osmotic force for multipurpose, and prevent rust

Machine・parts factory

Feature

  • Infiltrate quickly to corroded metal surface, giving lubricant by affecting metal surface under the rust
  • Effective for prevent gritting, easy to use for the place difficult to reach because with nozzle

Directions for use

  • Spray to the object from 20~30cm apart. It is more easily to make move for bolt or nut which stuck hard, leave it approximately 10 minutes after spray

Spray Belt Wax

2010年10月15日 admin

Spray Belt WaxAerosol wax change to solid

Factory

Feature

  • Effective for prevent slipping and sounding of flat or V belt, making better conduction efficiency

Directions for use

  • Spray to the belt
read more: Spray Belt Wax

Coupler Through

2010年10月15日 admin

Coupler ThroughJunction restorative

Machine factory・Car repair factory・household

Feature

  • Recovering electricity flow of electrical system of car, machine, instrument by only spraying, because of gettable recovery from broke in the circuit quickly
  • No corrosion for metal・rubber・resin・paint etc.

Directions for use

  • Spray to the point of breaking in the circuit
read more: Coupler Through

Flaw detection spray D

2010年10月15日 admin

Flaw detection spray DPin hole of metal parts, wrinkle, shrinkage, crack, crack of welded part, conjugation failure, grinding crack by metal fatigue, quenching crack etc, possible to do flaw inspection quickly

Metal working factory

Directions for use

  • After washing test object by AC cleaning liquid, coat B red penetrant uniformly 20~30cm part from surface, after leave it 3~15 minutes, remove by AC cleaning liquid. After that coat D white developer, then flaw is indicated by clear red color.

Flaw detection spray B

2010年10月15日 admin

Flaw detection spray BPin hole of metal parts, wrinkle, shrinkage, crack, crack of welded part, conjugation failure, grinding crack by metal fatigue, quenching crack etc, possible to do flaw inspection quickly

金属加工工場

Directions for use

  • After washing test object by AC cleaning liquid, coat B red penetrant uniformly 20~30cm part from surface, after leave it 3~15 minutes, remove by AC cleaning liquid. After that coat D white developer, then flaw is indicated by clear red color.

Flaw detection spray AC

2010年10月15日 admin

Flaw detection spray ACPin hole of metal parts, rinkle, shrinkage, crack, crack of welded part, conjugation failure, grinding crack by metal fatigue, quenching crack etc, ossible to do flaw inspection quickly

Metal working factory

Feature

  • Usable for degreasing agent

Directions for use

  • After washing test object by AC cleaning liquid, coat B red penetrant uniformly 20~30cm part from surface, after leave it 3~15 minutes, remove by AC cleaning liquid. After that coat D white developer, then flaw is indicated by clear red color.

Food Oil (For food processing machine)

2010年10月15日 admin

Food Oil (For food processing machine)Lubricant for food processing machine

Food・Cosmetic factory

Feature

  • It is more stable against heat or oxidation and continue lubricating effect long time compare with normal animal and vegetable oil because of using high purity vegetable oil for food which purified enough as ingredient. Also excel as digestion absorption in the body, usable at ease for the part of possibility to mix into the food.

Directions for use

  • After shake enough, spray to the object

Molyble

2010年10月15日 admin

MolybleHigh quality lubrication/infiltration/anti rust agent combined molybdenum

Machine factory・Car maintenance factory・House hold

Feature

  • Prevent die friction of machine, instrument・sticking by heat・abrasion・sounding
  • Efficient for removing bolt・screw with rust
  • Usable for various purpose because it has effect excel as lubrication・infiltration・anti rust・moisture prevention
  • As organic molybdenum which great excel as lubrication is broken up by osmotic oil, it infiltrate deeply with powerful, and there is great lubrication effect
  • Excel as anti rust・moisture prevention as water displacement anti rust oil is the base
  • As there is no corrosion for metal・wood・rubber・plastic, usable for many purposes.

Usage

  • Lubrication・infiltration・anti rust・moisture prevention・extreme pressure
  • Lubrication for precision machine and difficult place of hand lubrication
  • Improvement working efficiency of removing rusted screw・bolt・pin
  • Anti rust ・lubrication of wire rope・chain
  • Temporary lubrication of the part which is affected by water when the assembling or maintenance of car parts
  • Solution for die friction of door・arm・pedal and long time continuance of lubrication effect
  • Extreme pressure anti rust・anti corrosion・anti seizure for various kinds of machine
  • Lubrication part required long term・immediate effect
read more: Molyble

Oil Catcher

2010年10月15日 admin

Oil CatcherHigh efficiency oil adsorbent by natural material as gently for human and earth

Car factory・whole of factory・ Kitchen・Oil spill at sea or river

Feature

  • Adsorb splash oil , leakage oil at workshop by 4 times adsorption power compare to existing polypropylene products
  • Promote safety of work and improvement of efficiency, and protect natural environment of sea or ocean from oil pollution as waste oil or spill of leakage oil
  • Easy to correct as float after adsorbed oil because water is not adsorbed by usual condition

Directions for use

  • Use the place to remove oil
  • Sheet type : Around the machine of floated oil・leakage oil・oil separating tank・adsorption mat of leakage oil・lathe・cutting・press・food factory
read more: Oil Catcher

Albio

2010年10月15日 admin

g_arubio.jpgBiodegradability fine oil adsorbent

Various kinds of factory

Feature

  • Deodorize and resolve oil by power of biotechnology
  • Excel as water repellent by our original manufacturing method, adsorb only oil and repel water
  • Possible to adsorb oil and thin oil film surely as not sink in the water
read more: Albio

Stainless Cutter

2010年10月15日 admin

Stainless CutterNon chloride system coolant

Metal working factory

Feature

  • As non gas type spray, gently for environment and not wasteful
  • As not contain chloride system solvent・additive, gently for human and environment, and safety for materials
  • "PRTR" not applied product
  • Because excel as lubricity・coolability, protect abrasion of tool edge, and possible to keep life of cutting tools longer
  • Exert excellent effect for difficult to machine materials specially, possible to improve precision of machined surface. Also usable for copper and aluminum.

Directions for use

  • Spray proper quantity to the edge of cutting tools
read more: Stainless Cutter

Tapping spray Ace

2010年10月15日 admin

Tapping spray AceGeneric Coolant

Machine working・Metal working

Feature

  • Specially excel as lubricity, coolability, anti welding
  • It is possible to increase number of revolution than usual for any materials, useful for improvement of efficiency. Also it is possible to increase effect, specially for tapping.
  • Protect adhesion of built up edge by low speed machining of stainless steel. Protect gauge, possible to get satisfied result by reamer work.
  • Protection of cutting edge is incredible for long material of stainless steel by planer process, rough hewn of wide area, finishing
  • There is no sliding of cutting tools by slotter process (stainless steel), protect maximally damage of both edge

Directions for use

  • Spray to the edge of cutting tools

Tapscon

2010年10月15日 admin

TapsconCoolant for stainless steel and difficult to machine material

Metal work factory

Feature

  • By excel as anti welding effect, prevent formation of built up edge (cooling effect of vaporization heat is great), improve tool life, roughness of machined surface, prevent sticking by heat
  • No smoke and no odor compare to existing tapping
  • Inactive sulfosalt type cutting fluid usable all the way to NC automatic board, carbon steel by MC, alloy steel and difficult to machine material of stainless

Directions for use

  • Spray to edge of cutting tool. For prevent spray only gas, use by spray button straight upward
read more: Tapscon

Miracle Super Tapping

2010年10月15日 admin

Miracle Super TappingCoolant for stainless steel and difficult to machine material

Machine working・Metal working

Feature

  • Specially excel as lubricity, coolability, anti welding
  • Prevent abrasion of cutting tool, extend tool life, improve precision of machined surface
  • It is possible to increase number of revolution than usual for any materials, useful for improvement of efficiency. Also it is possible to increase effect, specially for tapping.
  • Protect adhesion of built up edge by low speed machining. Protect gauge, possible to get satisfied result by reamer work.
  • Useable spindle oil(diluted several times) as addition agent

Directions for use

  • Spray to edge of cutting tool
  • For prevent spray only gas, use by spray button straight upward